Kwikset Smartcode 914 - Prevent Unauthorized Entry; Security Precautions

©2015 Spectrum Brands, Inc.
7. Press “9” six times.
8. Press Lock button once.
If programming is successful, the keypad will flash green once with
one beep.
If programming is unsuccessful, the keypad will  ash red three times with
three beeps. Make sure to enter a valid Mastercode in step 3 during your
next attempt.
9. Press the Lock button while the door is open and unlocked. If
the latch bolt does not extend to lock, then all codes have been
successfully deleted.
©2015 Spectrum Brands, Inc.
61883 / 01
6 / 17
Technical Support
1-866-863-6584
www.kwikset.com