95
FUSES
The fuse box is next to the battery under the seat. If there is any
type of electrical system failure, always check the fuses first.
To avoid an electrical short circuit, turn off the main
ignition switch before checking or replacing a fuse.
To replace a fuse
1. Make sure the ignition switch is OFF.
2. Remove the fuse box cap.
3. Remove the old fuse from the fuse holder.
4. Insert a new fuse (of the proper capacity).
5. Reinstall the fuse box cap.
POTENTIAL HAZARD
Using an improper fuse.
WHAT CAN HAPPEN
An improper fuse can cause damage to the ATV’s electrical
system which could lead to a fire.
HOW TO AVOID THE HAZARD
Always use a fuse of the specified rating. Never use a foreign
object or metal material in place of a proper fuse.
To Next Page
Loading...
Need help?
General
