79
Engine Oil Replacement
1. Park the ATV on a level ground
2. Place a suitable container under the engine
3. Remove the oil fill cap and drain plug to drain the oil.
4. Reinstall the drain plug and tighten the drain plug to
specification.
5. Fill the engine with oil and install the oil fill cap.
Engine oil quantity
Periodic oil change ----------- 1.4 L
Total capacity ----------------- 1.6 L
Engine oil type
Viscosity -------------- SAE 10W-30
Type -------------------- API SJ type
NOTE: Dispose of the used oil and filter in an
environmentally proper way.
Be sure no foreign material enters the crankcase.
To Next Page
Loading...
Need help?
General
