28
CONTROL LOCATIONS & FUNCTIONS
DRIVE MODE SELECT LEVER
This KYMCO ATV is equipped with an automatic, dual-range
transmission with reverse capability. To shift your ATV into the
different drive modes, use the drive model select lever:
1. To engage HIGH (H) range from neutral (N), move the drive
mode select lever forward.
2. To engage LOW (L) range from HIGH (H) range, move the
lever outward and forward.
3. To engage reverse (R) gear from neutral (N), move the shift
lever forward, outward and back to the (R) position.
NOTE: The HIGH range is for normal riding with light
loads. The LOW range is for carrying heavy loads or
towing. Compared to HIGH range, the LOW range
position provides slower speed and greater torque to
the wheels.
Always shift the transmission into LOW range when
operating on wet or uneven terrain, when towing or
pushing heavy loads, or when using a plow. Failure to
follow this caution may result in premature V-belt failure or
other damage to drive system.
Never shift the transmission while your ATV is in motion.
Should your ATV be on a surface that is not level, engage
the parking brake (brake lever lock) before shifting into
another transmission range or into reverse.
To Next Page
Loading...
Need help?
General
