13
CONTROL LOCATIONS & FUNCTIONS
IGNITION SWITCH & STEERING LOCK KEY
Your KYMCO ATV is delivered with two ignition switch keys.
Keep the second key as a spare, and store it in a safe place. An
identifying number is stamped on each key. Use this number
when ordering a replacement key.
Ignition Switch Operation
Use your ATV's key to "unlock" and operate the ignition switch.
The ignition switch has two positions.
OFF position - All electrical circuits (except the accessory plug)
are off. The engine will not start or run. The key can be removed
in this position.
ON position - The ignition circuit is complete and the engine
can start and run. The key cannot be removed in this position.
NOTE: The accessory plug is powered by the battery at
all times.
Steering Lock Operation
To engage the steering lock, turn the handlebar to the right
and rotate the key clockwise in the lock.
Never engage the steering lock while the engine is running.
To Next Page
Loading...
Need help?
General
