12
3 Turn the paper size dial so that the size
of the paper you are going to use
appears in the paper size window.
When the paper size dial is set
to OTHER the paper size must
be set into the printer on the
operator panel. See the Opera-
tion Guide (PDF file) provided
on the CD-ROM.
4 Adjust the position of the paper guides
located on the left and right sides of the
paper cassette. Pull the release lever on
the left side guide and slide to the
desired paper size.
5 Adjust the position of the paper stopper
located at the rear of the paper cassette.
Pull the release lever and slide the
paper stopper to the desired paper size.
When shipped from the factory, the
paper cassette is set to A4 size.
When using other size paper, move the
paper guides and paper stopper all the
way out, insert the paper, then adjust
the paper guides and paper stopper to
the size of the paper. Adjust them so
that they are in light contact with the
paper.
Paper Size Dial Paper Size Window
Release
Paper Guides
Release
Paper
Stopper
FS3830NIG.book 12 ページ ２００３年１２月１２日 金曜日 午前１０時０分
To Next Page
Loading...
Need help?
General