Kyocera ECOSYS FS-3920DN Operation Guide

2-2 Using the Operation Panel
General Information
This chapter provides the information you need to configure the Ecosys
printer. In general you need to use the operation panel only to make
default settings. You can make most changes to the printer settings
using the printer driver through the application software.
You can also access the printer's various settings from a remote
location, by using the control panel, the printer driver or other utilities
such as the Status Monitor Utility. Other printer utilities can be installed
using the CD-ROM supplied with the printer.
The chapter describes the operation panel in detail, including its menus
and the procedures for changing various printer settings.
Note Changes to printer settings made using a software
application override changes made using the operation panel.

Kyocera ECOSYS FS-3920DN Specifications

General

Print Technology	Laser
Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Connectivity	USB 2.0, Ethernet
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	40 ppm
Memory	128 MB, expandable to 640 MB
Dimensions	390 x 285 mm
Weight	14.1 kg