Kyocera ECOSYS FS-3920DN Operation Guide

Using the Operation Panel 2-13
Print Status Page
You can check the printer's current status, including available memory
space and option settings by printing a status page.
1 Press Z while Report Print > is displayed.
2 Press U or V repeatedly until >Print Status Page appears.
3 Press [OK]. A question mark (?) appears.
4 Press [OK] again. The message Processing appears and the
printer prints a status page.
For a sample status page and its full description, refer to the next section
Understanding the Status Page.
Understanding the Status Page
The numbers in the following diagram refer the items explained below
the diagram. The items and values on the status page may vary
depending on the printer’s firmware version.
>Print
Status Page ?
Network
Memory
Emulation
Counters
Toner Gauge
Interface BlockPaper Settings
Group Settings
Option Status
Device Common Settings
Status Page
Printer
Firmware version
Print Settings
2
3
4
6
1
7
8
9
5

Kyocera ECOSYS FS-3920DN Specifications

General

Print Technology	Laser
Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Connectivity	USB 2.0, Ethernet
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	40 ppm
Memory	128 MB, expandable to 640 MB
Dimensions	390 x 285 mm
Weight	14.1 kg