Kyocera ECOSYS FS-3920DN Operation Guide

2-66 Using the Operation Panel
USB Device (USB interface setting)
This locks and protects the USB interface. The default setting is
Unblock.
1 Press Z while >I/F Block > is displayed. >>USB Device
appears.
2 Press [OK]. A blinking question mark (?) appears.
3 Select Block or Unblock using U or V.
4 Press [OK].
5 Press [MENU]. The display returns to Ready.
Parallel I/F (Parallel interface setting)
This locks and protects the parallel interface. The default setting is
Unblock.
1 Press Z while >I/F Block > is displayed. >>Parallel I/F
appears.
2 Press [OK]. A blinking question mark (?) appears.
3 Select Block or Unblock using U or V.
4 Press [OK].
5 Press [MENU]. The display returns to Ready.
Option I/F (Network interface card setting)
This locks and protects the network interface card (NIC). The default
setting is Unblock.
1 Press Z while >I/F Block > is displayed. >>Option I/F
appears.
2 Press [OK]. A blinking question mark (?) appears.
3 Select Block or Unblock using U or V.
4 Press [OK].
5 Press [MENU]. The display returns to Ready.
>>USB Device
?
Unblock
>>Parallel I/F
?
Unblock
Note Option I/F is displayed only when the optional network
interface is installed on the printer.
>>Option I/F
?
Unblock

Kyocera ECOSYS FS-3920DN Specifications

General

Print Technology	Laser
Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Connectivity	USB 2.0, Ethernet
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	40 ppm
Memory	128 MB, expandable to 640 MB
Dimensions	390 x 285 mm
Weight	14.1 kg