Using the Operation Panel
4-44
Orientation (Print orientation)
You can select portrait (upright) or landscape (sideways) page
orientation.
1 Press Z while >Page Set > is displayed.
2 Press U or V repeatedly until >>Orientation appears.
3 Press [OK]. A blinking question mark (?) appears.
4 Select Portrait or Landscape using U or V.
5 Press [OK].
6 Press [MENU]. The display returns to Ready.
Wide A4 (Wide A4 pitch)
Turn this to On to increase the maximum number of characters that can
be printed in a line for an A4 page (78 characters at 10 pitch) and Letter
size page (80 characters at 10 pitch). This setting is only effective in PCL
6 emulation.
1 Press Z while >Page Set > is displayed.
2 Press U or V repeatedly until >>Wide A4 appears.
3 Press [OK]. A blinking question mark (?) appears.
4 Select On or Off using U or V.
5 Press [OK].
6 Press [MENU]. The display returns to Ready.
XPS FitTo Page (Print area setting for XPS data)
Select On in this setting to enlarge or reduce XPS files to fit the printable
area during printing.
1 Press Z while >Page Set > is displayed.
2 Press U or V repeatedly until >>XPS FitTo Page appears.
3 Press [OK]. A blinking question mark (?) appears.
Portrait Orientation
A
Landscape Orientation
A
>>Orientation
? Portrait
>>Wide A4
? Off
>>XPS FitTo Page
? Off
To Next Page
Need help?
General