10-21
Troubleshooting > Troubleshooting
L
M
Message Checkpoints Corrective Actions
Reference
Page
Load paper in cassette #.
āā
(Displayed alternately)
Press OK to continue
using cassette #.
Is the indicated cassette out of
paper?
Load paper.
Select [Paper] to select the other
paper source. Select the [OK] key
to print on the paper in the currently
selected paper source.
page 3-2
Load paper in cassette #.
āā
(Displayed alternately)
Set selected size paper
and press [OK].
Is the indicated cassette out of
paper?
Load paper.
Select [Paper] to select the other
paper source. Select the [OK] key
to print on the paper in the currently
selected paper source.
page 3-2
Load paper in MP tray.
āā
(Displayed alternately)
Press OK to continue
using MP tray.
Is the paper of the selected size
loaded in the multipurpose tray?
Load paper.
Select [Paper] to select the other
paper source. Select the [OK] key
to print on the paper in the currently
selected paper source.
page 3-2
Load paper in MP tray.
āā
(Displayed alternately)
Set selected size paper
and press [OK].
Is the paper of the selected size
loaded in the multipurpose tray?
Load paper.
Select [Paper] to select the other
paper source. Select the [OK] key
to print on the paper in the currently
selected paper source.
page 3-2
Low temperature. Adjust
room temp.
ā Adjust the temperature and the
humidity of your room.
ā
Message Checkpoints Corrective Actions
Reference
Page
Machine failure. Call
service.
ā An error has occurred in the
machine. Make a note of the error
code displayed on the message
display, and contact your service
representative.
ā
Maximum number of
scanned pages. Job is
canceled.
Is the acceptable scanning count
exceeded?
Cannot scan pages any more. Job is
canceled. Select the [
OK
] key.
ā
Memory card error.
Job is canceled.
ā
An error has occurred on the
memory card. Job is canceled.
Select [
End
].
04: Insufficient space on the memory
card to complete this operation.
Move data or delete unneeded data.
ā
To Next Page
Loading...
Need help?
General
