10-22
Troubleshooting > Troubleshooting
N
P
Memory is full. Job is
canceled.
— The process cannot be performed
due to insufficient memory. If only
[End] is available, select [End]. The
job will be canceled.
—
Memory is full.
Print job cannot be
processed completely.
*1
— Unable to continue the job as the
memory is used up. Select
[Continue] to print the scanned
pages. The print job cannot be
processed completely. Select
[Cancel] to cancel the job.
The machine may reproduce the
same originals by arranging the
following settings:
•Select [On] of RAM Disk Mode
in System Menu, and then
decrease the RAM Disk Size.
•Select [Printer Priority] of
Optional Memory in System
Menu.
Before changing the RAM Disk
Mode or Optional Memory setting,
contact your administrator.
page 8-30
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Err. Clear (page 8-27)
Message Checkpoints Corrective Actions
Reference
Page
Non-genuine Toner.
Press [Help].
Is the installed toner container our
own brand?
The manufacturer assumes no
responsibility for damage caused by
a non-genuine toner. We
recommend that you only use
genuine toner containers. When
you want to use the toner container
currently installed, select the [OK]
key and the [Stop] key
simultaneously for 3 seconds or
more.
—
Message Checkpoints Corrective Actions
Reference
Page
Paper jammed above
Cassette 1.
― If a paper jam occurs, the machine
will stop and the location of the jam
will be indicated on the screen.
Leave the machine on and select
[Help] on the screen, and follow the
instruction to remove the jammed
paper.
page 10-38
Message Checkpoints Corrective Actions
Reference
Page
To Next Page
Loading...
Need help?
General
