6-28
Using Various Functions > Functions
FTP Encrypted TX
Encrypts images when sending via FTP. Encryption secures the document transmission.
(Value: [Off] / [On])
Delete after Printed
Automatically deletes a document from the box once printing is complete.
(Value: [Off] / [On])
You can only change the settings by logging in with administrator privileges.
The factory default login user name and login password are set as shown below.
Click [Security Settings], and then [Network Security] in the Command Center RX. Be sure that "SSL" of Secure
Protocol Settings is "On" and one or more effective encryption are selected in Client side settings.
For details, refer to the Command Center RX User Guide.
Model Name Login User Name Login Password
ECOSYS M3040idn/ECOSYS M3540idn 4000 4000
ECOSYS M3550idn 5000 5000
ECOSYS M3560idn 6000 6000
To Next Page
Loading...
