2-45
Installing and Setting up the Machine > Command Center RX
Registering Destinations
You can register destinations to the machine's Address Book, from Command Center RX.
1
Display the screen.
1 Launch your Web browser.
2 In the address or location bar, enter the machine's IP address or the host name.
Press [Device Information] in the home screen and then [Identification/Network] to check the
machine's IP address or the host name.
3 Log in with administrator privileges.
The factory default setting for the default user with administrator privileges is shown below.
* Upper case and lower case letters are distinguished (case sensitive).
4 From the [Address Book] menu, click [Machine Address Book].
5 Click [Add].
Device Information Identification/Network
To Next Page
Loading...
