6-12
Setup and Registration (System Menu) > System Menu
TCP/IP (IPv6)
Restart Network
Wired Network
[Menu] key > [▲] [▼] key > [Wired Network] > [►] key
Configure wired network settings.
Item Description
TCP/IP (IPv6) Select whether to use TCP/IP (IPv6).
Value: Off, On
RA(Stateless) Select whether to use RA (Stateless).
Value: Off, On
This function is displayed when [TCP/IP (IPv6)] is set to [On].
DHCPv6 Select whether to use the DHCP (IPv6) server.
Value: Off, On
This function is displayed when [TCP/IP (IPv6)] is set to [On].
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
Restart Network Restarts the network.
Item Description
TCP/IP For details on setting value.
TCP/IP (page 6-11)
TCP/IP (IPv6) For details on setting value.
TCP/IP (IPv6) (page 6-12)
LAN Interface Specify the settings for the LAN interface to be used.
Value: Auto, 10BASE-Half, 10BASE-Full, 100BASE-Half, 100BASE-Full, 1000BASE-T
Restart Network Restarts the network.
After changing the setting, restart the network or turn the machine OFF and then ON.