7-18
User Authentication and Accounting (User Login, Job Accounting) > Configuring Job Accounting
2 Enter the administrator ID and select the [OK] key.
3 Enter the administrator password and select the [OK] key.
3
Print the report.
[▲] [▼] key > [Print Job Accounting List] > [OK] key > [OK] key
Select an account and then select the [OK] key, Job Accounting List is printed.
Enter an ID consisting of between 1 and 16 numbers.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
The factory default settings for the administrator ID is set as shown below.
Enter a password consisting of between 0 (no settings) and 16 digits.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
The factory default settings for the administrator password is set as shown below.
You can set a number from 1 to 8 digits.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
If the entered account ID does not match the registered ID, a warning beep will sound and
login will fail. Enter the correct account ID.
Model Name Administrator ID
ECOSYS P5021cdn/ECOSYS P5021cdw 2100
ECOSYS P5026cdn/ECOSYS P5026cdw 2600
Model Name Administrator Password
ECOSYS P5021cdn/ECOSYS P5021cdw 2100
ECOSYS P5026cdn/ECOSYS P5026cdw 2600
To Next Page
Loading...
