6-21
Setup and Registration (System Menu) > System Menu
Power Off Rule (models for Europe)
[Menu] key > [▲] [▼] key > [Device Common] > [►] key > [▲] [▼] key > [Power Off Rule] > [►] key
Select whether or not the machine enters Power Off mode.
Power Off Timer (models for Europe)
[Menu] key > [▲] [▼] key > [Device Common] > [►] key > [▲] [▼] key > [Power Off Timer] > [►] key
Disp. Status/Log
[Menu] key > [▲] [▼] key > [Device Common] > [►] key > [▲] [▼] key > [Disp. Status/Log] > [►] key
Low Toner Alert
[Menu] key > [▲] [▼] key > [Device Common] > [►] key > [▲] [▼] key > [Low Toner Alert] > [►] key
Item Description
Network
Set whether or not the machine enters Power Off mode for Network.
Value: Off, On
Even when [Network] is set to [Off], if the machine does not communicate with the other
devices, the machine will enter Power Off Mode.
USB Cable
Set whether or not the machine enters Power Off mode for USB cable.
Value: Off, On
Even when [USB Cable] is set to [Off], if the machine does not communicate with the other
devices, the machine will enter Power Off Mode.
USB Host
Set whether or not the machine enters Power Off mode for USB host.
Value: Off, On
RAM Disk Set whether or not the machine enters Power Off mode for RAM Disk.
Value: Off, On
Item Description
Power Off Timer Select whether to turn off the power automatically after a period of inactivity.
Value: 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 9 hours, 12 hours, 1 day,
2 days, 3 days, 4 days, 5 days, 6 days, 1 week
Item Description
Disp. Status/Log Set the display method of the Status/Log.
If the ID card authentication is enabled, this setting is applied when you refer to the print job or
print job log from Command Center RX.
JobsDetailStatus Value: Show All, My Jobs Only, Hide All
Jobs Log Value: Show All, My Jobs Only, Hide All
Item Description
Low Toner Alert Set the amount of remaining toner to notify the administrator when to order a toner when the
toner is running low.
Value: Off, On
Low Toner Alert: Set the toner level for notification of low toner.
The setting range is 5 to 100% (in 1% increments). Displayed when
[Off/On] is set to [On] and the [▼] key is selected.
Selecting [Off] alerts you low toner when the amount of remaining toner becomes 5%.