Kyocera ECOSYS PA5500 Series

8-18
Setup and Registration (System Menu) > Operation Method
TCP/IP Settings -
TCP/IP Select whether to use TCP/IP Protocol.
Value: Off, On
IPv4 Setting Set up TCP/IP (IPv4) to connect to the network. This setting is available when [ TCP/IP ] is set to
[ On ].
DHCP Select whether to use the DHCP (IPv4) server.
Value: Off, On
Auto-IP Select whether to use Auto-IP.
Value: Off, On
IP Address Set the IP address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this item is displayed only and cannot be entered.
Subnet Mask Set the IP subnet mask.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this item is displayed only and cannot be entered.
Default Gateway Set the IP gateway address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this item is displayed only and cannot be entered.
DNS Server Set DNS server (IPv4).
Value: Auto (DHCP), Manual
NOTE
When [Manual] is selected, you can enter static DNS server information in the Primary
and Secondary fields provided.
DNS over TLS Set whether to connect to a DNS server during communication protected by TLS.
Value: Off, On, Auto
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description