3-11
Preparation before Use > Loading Paper
Loading Paper in the Multi Purpose Tray
The multi purpose tray will hold up to 100 sheets of plain paper (80 g/m
2
).
For details of the supported paper sizes, refer to the following:
Choosing the Appropriate Paper (page 11-15)
For the paper type setting, refer to the following:
Media Type Set. (page 8-9)
Be sure to use the multi purpose tray when you print on any special paper.
The capacity of the multi purpose tray is as follows.
âĸ Plain paper (80 g/m
2
), recycled paper or color paper: 100 sheets
âĸ Thick paper (106 to 220 g/m
2
): 5 sheets
âĸ Thick paper (104.7 g/m
2
): 100 sheets
âĸ Hagaki (Cardstock): 1 sheets
âĸEnvelope DL, Envelope C5, Envelope #10, Envelope #9, Envelope #6 3/4, Envelope Monarch, Youkei 4,
Youkei
2: ī
5 sheets
âĸ OHP film: 1 sheet
1
Open the multi purpose tray.
âĸ If you are using a paper weight of 106 g/m
2
or more, set the media type to Thick and set the weight of
the paper you are using.
âĸ Remove each transparency from the top tray as it is printed. Leaving transparencies in the top tray
may cause a paper jam.
âĸ When you load custom size paper, enter the paper size by referring to the following:
Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) or the Large Capacity Feeder (Bulk
Feeder Setting)) (page 3-17)
âĸ When you use special paper such as transparencies or thick paper, select the media type by referring to the
following:
Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) or the Large Capacity Feeder (Bulk
Feeder Setting)) (page 3-17)
To Next Page
Loading...
Need help?
General
