Kyocera ECOSYS PA5500 Series - Page 183

8-24
Setup and Registration (System Menu) > Operation Method
ThinPrint -
Off/On Select whether to use ThinPrint.
*1, *3
Value: Off, On
NOTE
This feature does not appear if the optional ThinPrint Option is not running.
Port Number Specifies the port number used. The default port number is 4000.
*1
Value: 1 to 32767
NOTE
This function is displayed when [Off/On] is set to [On].
ThinPrintOverTLS To use the Thin Print over TLS protocol, set [ThinPrintOverTLS] to [On].
*1, *2
Value: Off, On
NOTE
• This function is displayed when [Off/On] is set to [On].
• When selecting [On], it also requires a certificate for TLS. The default certificate is the
self-certificate of the machine.
Command Center RX User Guide
Available Net. -
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Off/On] is set to [On].
Wi-Fi
*2
Wired Network
WSD-PRINT -
Off/On Set whether to use our proprietary web services.
*1
Value: Off, On
Available Net. -
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Off/On] is set to [On].
Wi-Fi
*2
Wired Network
Enhanced WSD -
Off/On Set whether to use our proprietary web services.
*1
Value: Off, On
Available Net. -
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Off/On] is set to [On].
Wi-Fi
*2
Wired Network
Item Description