10-24
Troubleshooting > Troubleshooting
S
T
Registered numbers
exceeded.
Cannot add.
― There are already 100 accounts
registered so it is not possible to
register any new accounts.
page 9-21
Replace MK. ― Replace Maintenance Kit which is
displayed on the message display.
Replacement of the maintenance kit
is necessary and requires
professional servicing. Contact your
Service Representative.
—
Restricted by Job
Accounting.
Press [OK].
― This job is canceled because it is
restricted by Job Accounting. Select
[OK].
page 9-22
Replace the toner. ― Replace the toner container to our
specified toner container.
page 10-4
Message Checkpoints Corrective Actions
Reference
Page
SD card error.
Press [OK].
― An error has occurred on the SD card.
Job is canceled. Select [OK].
The error cord is as follows.
04: Insufficient space on the SD card
to complete this operation. Move data
or delete unneeded data.
―
SSD error.
Press [OK].
― An error has occurred on SSD. Job is
canceled. Select [End].
The error cords are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Turn the power OFF/ON. If the error
still occurs, divide the file into smaller
files. If the error occurs after the file is
divided, the specified file may be
damaged. Delete the file.
04: Insufficient space on SSD to
complete this operation. Move data
or delete unneeded data.
―
Message Checkpoints Corrective Actions
Reference
Page
The device cannot be
connected because
allowed connections
would be exceeded.
Are three handheld devices
connected simultaneously?
Cancel a connection to a portable
device that is not being used, or set
the machine's auto disconnect time to
break portable device connections.
page 7-5
The file name already
exists.
You cannot copy.
― Copying is not possible because data
with the same file name exists at the
destination. Delete the data with the
same file name at the destination
before copying.
page 5-9
Message Checkpoints Corrective Actions
Reference
Page
To Next Page
Loading...
