3-13
Preparation before Use > Loading Paper
4
Load paper.
Insert the paper along the paper width guides into the tray until it stops.
After removing new paper from its packaging, fan the paper before loading it in the multi purpose tray.
5
Specify the type of paper loaded in the multi purpose tray using the operation
panel.
Precaution for Loading Paper (page 3-3)
âĸ When loading the paper, keep the print side facing up.
âĸ Curled paper must be uncurled before use.
âĸ When loading paper into the multi purpose tray, check that there is no paper left over in the tray
from a previous job before loading the paper. If there is just a small amount of paper left over in
the multi purpose tray and you want to add more, first remove the left-over paper from the tray
and include it with the new paper before loading the paper back into the tray.
âĸ If there is a gap between the paper and the paper width guides, readjust the guides to fit the
paper in order to prevent skewed feeding and paper jams.
âĸ Ensure that the loaded paper does not exceed the level indicator (see illustration above).
Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) or the Large Capacity Feeder (Bulk Feeder
Setting)) (page 3-17)
To Next Page
Loading...
Need help?
General
