Connecting and Printing 3-3
Installing the Printer Driver
Ensure the printer is plugged in and connected to the PC before installing the
printer driver from the CD-ROM.
Installing the Software
If you are connecting this printer to a Windows PC, follow the next steps to
install the printer driver. The example shows you how to connect your printer
to a Windows 7.
1
Turn on the computer and start up Windows.
If the Welcome to the Found New Hardware Wizard dialog box
displays, select Cancel.
2
Insert the CD-ROM supplied with the printer into the optical drive of
the PC. In Windows 7, Windows Server 2008 and Windows Vista,
the user account control window may appear. Click Allow.
The installation program launches.
3
Click View License Agreement and read the License Agreement.
Click Accept.
4
Click Install software.
The print system detection window appears and the installer detects
the connected printer. If the installer does not detect a print system,
check that the print system is connected via USB and that it is turned
on. Then click Refresh to search print system again.
5
Confirm the printer you want to be installed, and click Next.
Note In Windows operating systems, you must be logged in with
administrator rights to install the printer driver.
Note If the software install wizard does not launch
automatically, open the CD-ROM window in Windows
Explorer and double-click Setup.exe.
Note While the information shown in Windows Vista and
Windows 7/Windows XP installation dialog boxes differs
slightly, the installation procedure is the same.
Note If the Found New Hardware Wizard appears, click
Cancel. If a hardware installation warning message appear,
click Continue.
To Next Page
Loading...
