Connecting and Printing 3-13
Printer Tab
The Printer tab allows you to set print processing parameters that are not
available in the KX Driver. As well as the form feed timeout, you can
change the memory size used for processing raster data such as bitmap
and JPEG files.
Connection Tab
You can use this tab to change the buffer memory size and buffer mode
of the printer for communication processing to the host.
Others Tab
The Others tab enables you to configure the printer settings shown
below.
Item Description
Auto sleep Configures the amount of time when the printer
automatically enters Sleep Mode.
EcoFuser Enables or disables the EcoFuser. Select On to
reduce the power consumption to a minimum by
turning off the heater of the fixing unit at Sleep Mode.
The default setting is On.
Panel lock Locks or unlocks the operation panel. Locking the
operation panel disables key operations from the
panel.
To Next Page
Loading...
