Loading Paper
2-6 OPERATION GUIDE
2
Load the printed sheet in the printed face-down position on the Manual Feed Tray
again, and print the rear side.
Long edge binding or Short edge binding can be selected depending on the
orientation of the sheet.
Selecting Paper Size
After loading paper, you need register the paper size.
The paper size that can be used are: A4, Letter, Legal, A5, B5, OfficioII,
Executive, Statement, Folio, B6, A6, ISO B5, Envelope C5,
Envelope #10, Envelope DL, Envelope #9, Monarch, Envelope #6, 16K
1 Access 12. Paper Size.
If you are unsure how to use this route map refer to Accessing Menu Items on
page xx.
2 Press W or X to select the paper size and press [OK]. The display returns to
the ready screen.
Binding Orientation How to Load
Long Edge Binding
Short Edge Binding
[Menu]
W or X
1. Common Setup
[OK]
W or X
12. Paper Size
[OK]
To Next Page
Loading...
