3-2
Copying
Basic Operation
Follow the steps as below for basic copying.
1 Press [Copy].
2 Place the originals. For details, refer to Loading Originals on page 2-18.
If the originals are curled at a front edge, straighten them prior to loading.
3 If a program is set, press the program key ([Program 1] - [Program 3]) in which the
program is registered.
4 Enter the number of copies.
Use the numeric keys, [▲] or [▼] to enter the copy quantity.
Note For details on functions that are registered in programs, refer to Using
Programs on page 3-5.
To Next Page
Loading...
