2JN
1-3-51
U610
(cont.)
1. Change the setting using the cursor left/right keys or numeric keys.
Increase the setting if a page received in the reduction mode is over-reduced and too much trailing
edge margin is left. Decrease it if the received image does not include all transmitted data.
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U611
Setting system 2
Description
Sets the number of adjustment lines for automatic reduction.
Start
1. Press the start key. The current setting is displayed in each item.
2. Select the item to be set using the cursor up/down keys.
Setting the number of adjustment lines for automatic reduction
Sets the number of adjustment lines for automatic reduction.
1. Change the setting using the cursor left/right keys or numeric keys.
2. Press the start key. The value is set.
Setting the number of adjustment lines for automatic reduction when A4 paper is set
Sets the number of adjustment lines for automatic reduction when A4 paper is set.
1. Change the setting using the cursor left/right keys or numeric keys.
2. Press the start key. The value is set.
Setting the number of adjustment lines for automatic reduction when letter size paper is set
Sets the number of adjustment lines for automatic reduction when letter size paper is set.
1. Change the setting using the cursor left/right keys or numeric keys.
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Description Setting range Initial setting Change in value
per step
Number of lines to be ignored when receiv-
ing a fax (A4R, letter) in the auto reduction
mode
0 to 22 0 16 lines
Display Description
ADJ LINES Sets the number of adjustment lines for automatic reduction.
ADJ LINES (A4) Sets the number of adjustment lines for automatic reduction when A4
paper is set.
ADJ LINES (LT) Sets the number of adjustment lines for automatic reduction when let-
ter size paper is set.
Description Setting range Initial setting
Number of adjustment lines for automatic reduction 0 to 22 7
Description Setting range Initial setting
Number of adjustment lines for automatic reduction
when A4 paper is set
0 to 22 22
Description Setting range Initial setting
Number of adjustment lines for automatic reduction
when letter size paper is set
0 to 26 26
To Next Page
Loading...
