Kyocera FS-1128MFP - Page 80

2JN-2
1-3-52
U612
Setting system 3
Description
Makes settings for fax transmission regarding operation and automatic printing of the protocol list.
This determines how trailing edge margin is detected (to prevent image from being mutilated) while printing a
received Fax.
Start
1. Press the start key.
2. Select the item to be set using the cursor up/down keys.
Selecting if auto reduction in the auxiliary direction is to be performed
Sets whether to receive a long document by automatically reducing it in the auxiliary direction or at 100%
magnification.
1. Select the setting using the cursor left/right keys.
Initial setting: ON
2. Press the start key. The setting is set.
Setting the automatic printing of the protocol list
Sets if the protocol list is automatically printed out.
1. Select the setting using the cursor left/right keys.
Initial setting: OFF
2. Press the start key. The setting is set.
Setting how trailing edge margins are detected
This determines whether trailing edge margin is detected (to prevent image from being mutilated) while print-
ing a received Fax.
1. Select ON or OFF using the cursor left/right keys.
Initial setting: ON
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
AUTO REDUCTION Selects if auto reduction in the auxiliary direction is to be performed.
PROTOCOL LIST Sets the automatic printing of the protocol list.
DETECT TRAIL Sets how trailing edge margins are detected
Display Description
ON Auto reduction is performed if the received document is longer than
the fax paper.
OFF Auto reduction is not performed.
Display Description
OFF The protocol list is not printed out automatically.
ERROR The protocol list is automatically printed out after communication only
if a communication error occurs.
ON The protocol list is automatically printed out after communication.
Display Description
ON Detects trailing edge margin
OFF Does not detect trailing edge margin