EasyManuals Logo

Kyocera FS-2020D Advanced Operation Guide

Kyocera FS-2020D
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #75 background imageLoading...
Page #75 background image
5-4 Maintenance
2 Push lock lever to the right and pull out the toner container.
3 Put the old toner container in the plastic bag (contained in the toner
kit) and discard it later according to the local code or regulations for
waste disposal.
4 Take the new toner container out of the toner kit.
5 Shake the new toner container at least 10 times as shown in the
figure in order to distribute the toner evenly inside the container.
6 Remove the label from the toner container.
7 Set the new toner container in the printer and push down on the top
of the toner container to install it firmly in place as shown at the left.
8 Close the top cover.
Proceed to the next section.

Table of Contents

Other manuals for Kyocera FS-2020D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera FS-2020D and is the answer not in the manual?

Kyocera FS-2020D Specifications

General IconGeneral
ColorNo
Duplex printingYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)9 s
Print speed (black, normal quality, A4/US Letter)35 ppm
Memory typeDDR2
Processor modelPowerPC 440
Maximum internal memory1152 MB
Sound power level (standby)29 dB
Sound pressure level (printing)52 dB
Power supply type220/240 V, 50/60 Hz
Capacity cartridge12000 sheets
Power consumption (active)560 W
Recommended monthly print volume20000 pages
Maximum duty cycle150.000 pages per month
Number of print cartridges1
Total input capacity500 sheets
Total output capacity250 sheets
Maximum input capacity1100 sheets
Maximum number of input trays2
Multi-Purpose tray input capacity100 sheets
Maximum print size216 x 356 mm
Paper tray media typesPlain paper, Recycled paper
Paper tray media weight60 - 120 g/m²
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 220 g/m²
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)9.2 W
Power consumption (PowerSave)5.7 W
Energy Star Typical Electricity Consumption (TEC)2.6 kWh/week
DisplayLCD
CertificationGS, TüV, CE
Standard interfacesParallel, USB 2.0
Optional connectivityEthernet, Wireless LAN
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)382 x 394 x 285 mm

Related product manuals