Kyocera FS-2020D Advanced Operation Guide

6-10 Troubleshooting
Storage Error Codes
Hard Disk Errors
CompactFlash (CF) Card and USB Flash Memory Errors
Code Meaning
01 Hard disk format error. If this error recurs even if the power has been turned
off and then on, reformat the hard disk.
02 The disk system is not installed. Recheck the requirements for using the
system and the devices.
04 There is no available hard disk space. Delete unnecessary files, etc., in
order to free up space.
05 The specified file does not exist in the hard disk.
06 There is no memory available to the hard disk system. Increase the
available memory.
10 Formatting is not possible because host data is being spooled on the hard
disk. Wait until the hard disk is ready, and then format.
97 The number of permanent code jobs that can be stored reached the limit
value, and no more can be saved. Either delete some unnecessary jobs,
etc., or increase the limit.
98 An unreadable page was found in a job (The job is damaged.).
99 A print job for the specified ID does not exist in the hard disk.
Code Meaning
01 The printer does not support the CF card inserted, or the CF card is broken.
Insert the correct CF card.
For more information, refer to Memory Card (Using the memory card) section
in the Advanced Operation Guide.
02 The CF card is not installed. Recheck the requirements for using the system
and the CF card.
03 The CF card is write protected. Check the CF card's status.
04 There is not enough space in the CF card. Delete unnecessary files or use a
new CF card.
05 The specified file is not on the CF card or the USB flash memory.
06 There is not enough printer memory to support the CF card system. Increase
printer memory.
50 The USB flash memory is write protected, or invalid. Check the USB flash
memory’s status.

Kyocera FS-2020D Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	35 ppm
Memory type	DDR2
Processor model	PowerPC 440
Maximum internal memory	1152 MB
Sound power level (standby)	29 dB
Sound pressure level (printing)	52 dB
Power supply type	220/240 V, 50/60 Hz
Capacity cartridge	12000 sheets
Power consumption (active)	560 W
Recommended monthly print volume	20000 pages
Maximum duty cycle	150.000 pages per month
Number of print cartridges	1
Total input capacity	500 sheets
Total output capacity	250 sheets
Maximum input capacity	1100 sheets
Maximum number of input trays	2
Multi-Purpose tray input capacity	100 sheets
Maximum print size	216 x 356 mm
Paper tray media types	Plain paper, Recycled paper
Paper tray media weight	60 - 120 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	9.2 W
Power consumption (PowerSave)	5.7 W
Energy Star Typical Electricity Consumption (TEC)	2.6 kWh/week
Display	LCD
Certification	GS, TüV, CE
Standard interfaces	Parallel, USB 2.0
Optional connectivity	Ethernet, Wireless LAN
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Dimensions (WxDxH)	382 x 394 x 285 mm