EasyManuals Logo

Kyocera FS-2020D Advanced Operation Guide

Kyocera FS-2020D
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #97 background imageLoading...
Page #97 background image
6-18 Troubleshooting
Rear Unit
1
If paper is not completely ejected into the output tray, open the rear
unit.
2 Open the fuser cover and remove the jammed paper by pulling it out.
3 Close the rear unit. The printer warms up and resumes printing out.
Envelope Feeder
Paper is jammed at the optional envelope feeder. Remove the jammed
paper using the same procedure as for a jam at the MP Tray. Then, open
and close the paper transfer unit. For details, refer to the User's Manual
for the envelope feeder.
Bulk Paper Feeder
Paper is jammed at the optional bulk paper feeder. Detach the bulk
paper feeder from the printer by sliding with the rail away from the
printer, holding the bulk paper feeder by both hands. If paper is partially
fed out from the feeder's output slot, pull the paper out by hand.
Note If you cannot find a paper jam, try checking inside the
rear of the printer.
CAUTION The fuser unit inside the printer is hot. Do not
touch it with your hands as it may result in burn injury.
Remove jammed paper carefully.

Table of Contents

Other manuals for Kyocera FS-2020D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera FS-2020D and is the answer not in the manual?

Kyocera FS-2020D Specifications

General IconGeneral
ColorNo
Duplex printingYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)9 s
Print speed (black, normal quality, A4/US Letter)35 ppm
Memory typeDDR2
Processor modelPowerPC 440
Maximum internal memory1152 MB
Sound power level (standby)29 dB
Sound pressure level (printing)52 dB
Power supply type220/240 V, 50/60 Hz
Capacity cartridge12000 sheets
Power consumption (active)560 W
Recommended monthly print volume20000 pages
Maximum duty cycle150.000 pages per month
Number of print cartridges1
Total input capacity500 sheets
Total output capacity250 sheets
Maximum input capacity1100 sheets
Maximum number of input trays2
Multi-Purpose tray input capacity100 sheets
Maximum print size216 x 356 mm
Paper tray media typesPlain paper, Recycled paper
Paper tray media weight60 - 120 g/m²
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 220 g/m²
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)9.2 W
Power consumption (PowerSave)5.7 W
Energy Star Typical Electricity Consumption (TEC)2.6 kWh/week
DisplayLCD
CertificationGS, TüV, CE
Standard interfacesParallel, USB 2.0
Optional connectivityEthernet, Wireless LAN
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)382 x 394 x 285 mm

Related product manuals