Kyocera FS-2100D - Page 100

Operation Panel
4-38
Use the procedure below to register the name to be displayed for the custom paper.
1 In the Paper Settings menu, press U or V to select Media Type
Set..
2 Press [OK]. The Media Type Set. screen appears listing the
media types that can used with the printer.
3 Press U or V to select the custom paper (CUSTOM 1 to 8) for which
you want to register a name to display.
4 Press [OK]. A menu for the selected media is displayed.
5 Press U or V to select Name Entry.
6 Press [OK]. The Name Entry screen appears.
7 Use the numeric keys to enter the name to display for the custom
paper.
8 Press [OK]. Register the name to display and the renamed custom
paper screen reappears.
Reset Type Adj. (Resets customized settings)
This resets all the settings specified in Media Type Set. (Paper type settings) on page 4-35.
1 In the Paper Settings menu, press U or V to select Reset Type
Adj..
2 Press [OK]. A confirmation screen appears.
3 Press [Yes] ([Left Select]). The message Completed. appears
and the Paper Settings menu reappears.
Pressing [No] ([Right Select]) returns to the Paper Settings
menu without resetting the customized settings.
Media Type Set.: a b
********************-
2 Transparency
3 Preprinted
[ Exit ]
1 Plain
Note Up to 16 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-2.
CUSTOM 1: a b
********************-
2 Duplex
3 Name Entry
[ Exit ]
1 Paper Weight
Name Entry: a b
* S
ABC
[ Text ]
Reset Type Adjust.
Are you sure?
[ Yes ] [ No ]