Kyocera FS-2100DN - Page 10

4-5. Protocols > Protocols > Server Settings
The protocols to use can be selected.
4-6. Protocols > Protocols > Client Settings
The FTP client and CIFS client can be configured.
Item Description
Server Settings
Enable (On) or disable (Off) the following protocols.
— IPP
— IPP over SSL*
— LPD
— RAW Port
— HTTP
— HTTPS*
*Note : To activate the configuration, the Encryption
needs to be
set to ON
.
FTP Server FTP Server Enables (On) or disables (Off) the FTP server.
FTP Server Port Number Sets the FTP Port Number. (Default port: 21)
FTP Status Check
Enables (On) or disables (Off) the FTP status check.
FTP Server over SSL Encrypts using SSL. Select "OFF" to not use it.
— OFF
— StartTLS
— FTP Server over SSL
— To activate the configuration, the Encryption needs
to be set to ON.
ThinPrint ThinPrint
Enables (On) or disables (Off) ThinPrint. ThinPrint is a
technology that distributes the network load due to printing
through compression and bandwidth control of the print data. To
use ThinPrint, .printServerEngine is required on the server,
and .printClient is required on the client ( printer/MFP ). When
the ThinPrint feature of the IB-51 is turned on, the IB-51
operates as a ThinPrint client.
ThinPrint Port Number
Specifies the port that is used for communication
with .printServerEngine. The default value is 4000.
ThinPrint over SSL Select to enable (On) or disable (Off) encryption by SSL.
— To activate the configuration, the Encryption needs
to be set to ON.
Import Client Certificate Imports the client certificate, when EAP-TLS is selected for the
authentication.
Password Enter the password when importing certificates.
32 characters maximum.
Import CA Certificate Imports the CA certificate when EAP-TLS/EAP-TTLS/PEAP is
selected for the authentication.
Page 10 of 2
2
Using a Web Browser to Manage the I
B
-51
10
/
2
/
201
2
file:///C:/Tom/PDF/I
B
-51/I
B
-51%20Setu
p
%20Guide%20HTML%20En
g
lish/card
_
home
pa
...