Kyocera FS-2100DN Management Guide

A
fter system startup, the system conducts polling at regular intervals to connect to servers automatically even when registered file
servers are running.
4-9. Protocols > AppleTalk
This print system supports Mac OS. (See 1-1. Compatible Systems) and is compatible with LaserWriter driver version 8.x. To print in
A
ppleTalk networks, activate AppleTalk protocol
.
4-10. Protocols > NetBEUI/NetBIOS
Print systems connected via NetBEUI are registered in Windows in My Network.
4-11. Management/E-mail > SMTP > General
The IB-51 can notify registered users by e-mail when the toner is running out, or send other information. SMTP is used for this feature.
You must configure the SMTP protocol settings before the IB-51 can connect to an SMTP server.
Item Description
Print Server Mode Up to eight file servers can be registered. If there are nine or more file servers, register the priority
file server names. If none are registered, up to eight servers are automatically connected at
startup. However, print server names in the file server must match IB-51 print server names.
Remote Printer Mode Up to eight print servers can be registered. If there are nine or more print servers, register the
priority print server names. If none are registered, up to eight servers are automatically connected
at startup. However, printer/MFP names (printer port names) in the print server must match IB-51
remote printer names (printer port names). Even if registered file servers are started after the IB-
51, the IB-51 regularly conducts polling so they will be automatically connected.
Item Description
AppleTalk Choose whether AppleTalk protocol is enabled (On) or disabled (Off).
Printer Name Identifies printers/MFPs in the AppleTalk network.
Zone Name Identifies the AppleTalk zone (network). An asterisk (*) here indicates the default zone.
Item Description
NetBEUI Protocol Choose whether NetBEUI protocol is enabled (On) or disabled (Off).
NetBIOS over TCP/IP Enables (On) or disables (Off) NetBIOS over TCP/IP. When this setting is on, NetBIOS can be
used in a TCP/IP network environment.
Browse Master When this option is selected, the print system changes to browse master, and a workgroup is
created in My Network. When the option is not selected, the print system is added to an existing
workgroup.
Printer Name The printer/MFP name is interrelated with the host name configured at TCP/IP setting page
(Protocols > TCP/IP > TCP/IP). If you want to change the NetBEUI printer/MFP name, change the
TCP/IP host name.
Workgroup The printing workgroup is a workgroup shown in Entire Network in My Network. The default
workgroup name is "KM-NetPrinters" or "NC-NetPrinters".
Comment You can enter a comment as desired. This field can also be left blank.
Item Description
SMTP Protocol Choose whether SMTP protocol is used (On) or not (Off).
Page 1
2
of 2
2
Using a Web Browser to Manage the I
B
-51
10
/
2
/
201
2
file:///C:/Tom/PDF/I
B
-51/I
B
-51%20Setu
p
%20Guide%20HTML%20En
g
lish/card
_
home
pa
...

Kyocera FS-2100DN Specifications

General

Category	All in One Printer
Technology	Laser
Maximum Resolution	1200 x 1200 DPI
Duplex Printing	Yes
Print Margins	4 mm
Standard Printer Languages	PCL6
Maximum Print Size	A4
Interface	USB 2.0, Ethernet
Warm-up Time	15 s