Kyocera FS-6030MFP

LE 03 ConstructionLE 03 Construction
Pa
p
er feede
r
By inserting the cassette the liftmotor (LM) starts.
It stops by swichting the LIFTFULL sensor.
The automatic paper size detection is controlled by
sensor PWSW (width) and PLSW1 – 3 (length).
p
Paper cassette level
The paper level in the cassette is detected by 2
sensor‘s on the rear of the machine.
(PAPEMP1 and 2)
Note
For easier replacement of the paper feed unit, the
LIFTFULL sensor is installed in the bottom plate of
the frame.