Kyocera FS-6030MFP

LE 04 MaintenanceLE 04 Maintenance
The Firmware includes several different files and the data
size is approximately 105MB.
Please use always the complete Firmware file for the
upgrade
Firmware upgrade
upgrade
.
If you store also the SKIP File Data on the USB memory
stick, you only upgrade the parts of firmware which are
different. This may be much faster.
If you want to upgrade the whole firmware you have to
delete the skip file first.
Preparation:
Extract the file that has the download firmware and put
them on the USB Memory.
To Update:
Check the current firmware release with U019.
Turn OFF the main power switch.
Insert USB memory that has the firmware into the USB
memory slot.
Turn ON the main
p
ower switch.
p
About 50 seconds later, “Firmware Update” will be
displayed (this shows the download has started).
The display shows the software that is now upgrading.
When finished, turn OFF the main power switch and
remove the USB memory.
The upgrade via CF card is possible in exactly the same
way.