Kyocera FS-6030MFP - Page 54

Blocking the Interfaces
LE 05 Command CenterLE 05 Command Center
Blocking
the
Interfaces
Action Targeted blocking of the device's interfaces.
Recommendations • If unauthorized use of the device is to be prevented (e.g. to print holiday photos).
• If arbitrary firmware updates are to be prevented (e.g. USB host).
• Part of a security concept.
Pre-conditions Administrative access to the Command Center.
Notes • After setup, the device has to be switched off briefly so that the status can be
activated.
Alternatively, a restart can be carried out via the Command Center.
If a fax system is integrated in the system, this is done by blocking the "Opt.
interface 1" causes it to be switched off.
As the interface stat s is changed onl after the de ice is s itched on again the
As
the
interface
stat
u
s
is
changed
onl
y
after
the
de
v
ice
is
s
w
itched
on
again
,
the
causal link might be lost.