2GL/2FV/2FW
1-4-2
Service items Description
Printing service sta-
tus page (For 16 ppm
GDI printer)
Description
Prints a status page for service purpose.
The service status page bears the serial number, engine firmware version, controller firm-
ware version and the total print count. Printing a service status page should be executed by
running the dedicated 16 ppm GDI printer software run on a PC.
Purpose
To obtain printer information.
Procedure
1. Load the CD-ROM (Kyocera FS-720 Library) supplied with the printer in the optical drive
and proceed with software installation according to the instructions given.
2. Starting with Windows’s Menu, browse to the Configuration Tool window following the
steps below.
[Start] X [All Programs] X [Kyocera] X [FS-720 Printer] X [Configuration Tool]
Figure 1-4-1 Configuration tool
3. Click [Print Status Page]. A service status page is printed.
Figure 1-4-2 Service status page (For 16 ppm GDI printer)
Serial Number
SPL4700151
Engine Firmware Version
2FV_1000.001.013
Controller Firmware Version
2GL_3000.001.003
Printed Pages
2324
To Next Page
Loading...
