Kyocera FS-920 - Service Mode Operations

2GL/2FV/2FW
1-4-1
1-4 Maintenance Mode
1-4-1 Service mode
The product incorporates several service modes which are activated by using the keys on the operation panel or by com-
manding from a PC.
(1) Executing service mode
Printing service status page (For 16 ppm GDI printer) ................ See page 1-4-2.
Printing service status page (For 16/18 ppm printers)................. See page 1-4-3.
Printing event log (For 16/18 ppm printers) ................................. See page 1-4-6.
Printing test page (For 16 ppm GDI printer) ................................ See page 1-4-11.
Toner install mode........................................................................ See page 1-4-11.