2GL/2FV/2FW
1-4-9
Service items Description
Items Description
cont.
(a) Cause of paper jam
10: Paper does not arrive at the registration sensor. [42]
10: Paper does not arrive at the registration sensor. [43]
11: Paper does not pass the registration sensor. [48]
12: Paper remains at the registration sensor when power is turned
on. [48]
20: Paper does not arrive at the exit sensor. [48]
21: Paper does not pass the exit sensor. [47]
22: Paper remains at the exit sensor when power is turned on. [47]
E0: Paper misfeed occurs due to forced stop when an error occurs
during printing. (such as opening of the top cover)
F0 to FF: Paper misfeed by another cause.
Values within [ ] indicate paper misfeed locations. (hexadecimal)
(b) Detail of jam location
(c) Detail of paper source (Hexadecimal)
00: Manual feed tray
01: Paper cassette
02 to 07, 09: Not used
(d) Detail of paper size (Hexadecimal)
01: Monarch
02: Business
03: International DL
04: International C5
05: Executive
06: Letter-R
86: Letter-E
07: Legal
08: A4R
88: A4E
09: B5R
89: B5E
0A: A3
0B: B4
0C: Ledger
0D: A5
0E: A6
0F: B6
10: Commercial 9
11: Commercial 6
12: ISO B5
13: Custom
1E: International
C4
1F: JIS hagaki
20: JIS oufuku
21: Officio2
22: Special 1
23: Special 2
24: A3 wide
25: Ledger wide
26: Full bleed
paper (12 × 18)
27: 8K
28: 16K-R
A8: 16K-E
32: Statement-R
B2: Statement-E
33: Folil
34: Youkei 2
35: Youkei 4
[42]
[43]
[48]
[47]
Exit sensor
Registration
sensor
To Next Page
Loading...
