Kyocera FS-920 - Page 49

2GL/2FV/2FW
1-5-7
4200
(E3)
cont.
Code Contents
Remarks
Causes Check procedures/corrective measures
No
No
OK?
OK?
No
OK?
No
OK?
End.
End.
No
OK?
No
OK?
End.
End.
Continued from
previous page.
Continued from
previous page.
Yes
Yes
Yes
Yes
Yes
Yes
Turn power switch on.
Turn power switch on.
Turn power switch on.
Turn power switch on.
Turn power switch on.
Replace laser scanner
unit. See page 1-6-21.
Replace main PWB. See
page 1-6-15 or 16.
Replace main PWB. See
page 1-6-15 or 16.
Replace engine/high
voltage PWB.
See page 1-6-17.
Replace engine/high
voltage PWB.
See page 1-6-17.
Replace harness
between main PWB and
laser scanner unit.
Replace harness
between main PWB
and laser scanner unit.
See page 1-6-15 or 16.
Replace harness between
main PWB and engine/high
voltage PWB.
Replace harness between
main PWB and engine/high
voltage PWB.
(A)
(B)