2. Double click
Network
.
3. Click the
Configuration
tab and locate
TCP/IP -> ....
.
Figure 1. TCP/IP Protocols in Network Protocols
If
TCP/IP ->
(Network adapter name)
is not in the list, click on
Add
to install it. For details on installing network
services and protocols in Windows, refer to the Windows documentation or Help.
You can verify the IP address, subnet mask, and gateway currently set for your PC by selecting
TCP/IP ->
(
Network adapter name
) and clicking
Properties
.
Creating a KPrint Port for TCP/IP Printing
The KPrint Port is a printer port you create in Windows to print from the printer driver to the network card's IP address.
This is why we include KPrint, a dedicated utility for the IB-23. KPrint enables you to create the TCP/IP port.
Once installed, you can use the KPrint utility to create the port in Windows for any IB-23 present in the network. If you
have not already done so, install the KPrint utility following the procedure in Installing the Software Utilities
.
Using TCP/IP Port:
1. Run the
KPrint Add Port wizard
by selecting Windows
Start
,
All Programs
, and
Kyocera
, and clicking
KPrint
Add Port
.
2. Select the mode to use and click
Next
. Check with your network administrator regarding which mode you should
use.
3. In
IP address or host name
below, enter the IP address of the IB-23 to connect. If you click
Search
, the
IB-23
Search
window opens. This will search and list all available IB-23 in the network. Select the IB-23 you want to
connect the TCP/IP port.
If you click
Configure
, you can modify the scope of the search by specifying one or more specific network
segment addresses. In the
Search Configuration
window, enter the network segment followed by '255,' e.g.
'171.62.186.255.' This causes the search to be conducted only in the '171.62.186.0' segment.
2/4 ページWindows Printing: TCP/IP
2006/05/26file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\windows_printi...
To Next Page
Loading...
