NetWare Printing
This page explains about the steps to use a web browser to set up NetWare server mode on the IB-23. The instructions
are designed assuming that the NetWare print queue already exists. To create the print queue, use a NetWare utility such
as NWAdmin.
Accessing the IB-23 with a Web Browser
Setting Up Print Server Mode
Setting Up Remote Printer Mode
Sending Jobs to the Print Queue
Accessing the IB-23 with a Web Browser
You can use a web browser to configure the parameters used in NetWare server mode. For details, refer to the section
on Using a Web Browser to Manage the IB
-23.
1. Launch a web browser.
2. In the address bar, enter the IP address assigned to the IB-23.
3. After the web browser displays the IB-23 COMMAND CENTER, click the
Advanced
tab.
4. In the left menu of the COMMAND CENTER, click
NetWare
>
General
.
1/4 ページNetWare Printing
2006/05/26file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\netware_printi...
To Next Page
Loading...
