ready in the print queue by polling. In this mode, a NetWare print server can service queues on up to eight file servers. To
operate the IB-23 in print server mode, access the basic settings page for NetWare from the COMMAND CENTER and
select
Print Server Mode
. No other computer is required as a print server. This mode uses a NetWare logon slot (that is,
one user license).
The setting parameters used in print server mode are as follows.
Setting Up Remote Printer Mode
In remote printer mode, the IB-23 connects to an active print server on the network. This print server starts
PSERVER.NLM on the NetWare file server. Remote printer mode does not require a NetWare logon slot and does not
conduct queue polling. However, print jobs are not received as efficiently in remote printer mode. To operate the IB-23 in
remote printer mode, access NetWare: General from the COMMAND CENTER and select Remote Printer Mode.
The setting parameters used in remote printer mode are as follows.
Sending Jobs to the Print Queue
The created print queue is selected as the destination printer port of the printer driver. If no printer driver is installed,
follow these steps to install one.
1. On the Windows desktop, double-click on
My Network Places
.
2. Double-click on
Entire Network
.
3. Double-click on the
Novell Directory Services
folder to open it.
4. Proceed to the context that created the queue and right-click on the printer to view the drop down list.
5. In this menu, click
Install
.
Print Server Mode Choose whether print server mode is enabled (On) or disabled (Off).
Print Server Name Shows the print server name.
Queue Polling Interval The polling interval can be designated.
Banner Page Requests Banner printing is an option in print server mode.
Password (Optional) A password can be designated as desired. Login requires that the password here
matches the print server password set by the NetWare utility.
Remote Printer Mode Choose whether remote printer mode is used (On) or not (Off).
Remote Printer Name Shows the print server name.
Job Timeout Set the timeout to complete jobs in remote printer mode in a range of 4-255 seconds.
3/4 ページNetWare Printing
2006/05/26file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\netware_printi...
To Next Page
Loading...
