Using a Web Browser to Manage the IB-23
This section describes how to manage the IB-23 using a web browser.
1.COMMAND CENTER Overview
2.Start Page
3.Basic Page
4.Printer Page
5.Advanced Page
6.Troubleshooting
1. COMMAND CENTER Overview
Configure and monitor the IB-23 from the unit's internal webpage, through the COMMAND CENTER. The COMMAND
CENTER is your web interface for managing the IB-23 from your computer. The computer and IB-23 are linked via
TCP/IP.
Note:
Confirm the following points before accessing the COMMAND CENTER.
Your computer must support TCP/IP.
The IB-23's IP address must be configured.
1-1. Compatible Systems
The COMMAND CENTER can be used with these operating systems.
Microsoft Windows 98SE/Me/2000/XP/Server2003, and Microsoft Windows NT 4.0
Apple Macintosh OS X 10.x
1-2. Compatible Web Browsers
The following web browsers have been verified for the COMMAND CENTER.
1-3. Accessing COMMAND CENTER
1. Launch a web browser.
2. In the address bar, enter the IP address assigned to the IB-23 as the URL. The home page gives basic information
about the IB-23 and shows the current status and control panel display.
3. To view or configure settings, choose a category from the navigation bar on the left.
Note:
If an administrator password has been set for the COMMAND CENTER, you will be prompted to enter a user name and
password when accessing pages other than the Start page. The administrator password can be designated on the Basic
Page of the COMMAND CENTER.
OS
Web Browser
Windows Microsoft Internet Explorer 5.5 and 6.0
Netscape 6.2 and 7.1
Opera 7
Mozilla 1.5
Mac OS Microsoft Internet Explorer 5.2 [SSL not supported]
Netscape 7.1
Safari 1.0 (OS X 10.2 or later) [2.0 needed for SSL]
1/19 ページUsing a Web Browser to Manage the IB-23
2006/05/26file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\card_homepag...
To Next Page
Loading...
