Security
This section covers the following topics related to printer and networking security.
Administrator Account
IP Filters
Encryption
Firmware Updates
Administrator Account
The Administrator (Admin) account is the master access account. It controls access to the printer and networking
configuration from all setup and management utilities including the HTML web pages.
! Note:
The factory default for the IB-23 is no password. Setting the Admin password is highly recommended to prevent
unauthorized changes to the printer and networking configuration.
WARNING:
If you forget the administrator password, following the instructions given in Resetting to Factory Defaults
to
restore the factory default settings and clear the password.
1. In the web browser address bar, enter the printer's IP address to display the printer webpage.
2. Click the
Basic
tab and then click
Security
in the menu on the left. Alternatively, click the
Advanced
tab and then
click
Account Setup
in the menu on the left.
3. Enter a password in the administrator account section and click
Submit
.
1/7 ページSecurity
2006/05/26file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\security.htm
To Next Page
Loading...
