Figure 1. COMMAND CENTER Basic NetWare Settings Page
5. Complete each field for the NetWare mode you will use. The parameters that apply to both print server mode and
remote printer mode are as follows.
6. Click Submit, when the settings are complete.
Setting Up Print Server Mode
By using the IB-23 in print server mode for operation as a print server makes the IB-23 constantly monitor for jobs that are
NetWare Protocol Choose whether NetWare protocol is enabled (On) or disabled (Off).
Bindery Mode Choose whether bindery mode is enabled (On) or disabled (Off).
Frame Type Choose from four supported four frame types: 802.2, SNAP, ETHERNET-II, and
802.3. You can also choose auto-detect.
NDS Tree Designate the name of the NDS tree for the connection.
NDS Context Designate the NDS context for connections in print server mode.
2/4 ページNetWare Printing
2006/05/26file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\netware_printi...
To Next Page
Loading...
