Windows Printing: NetBEUI
This section explains how to install the IB-23 in the Windows NetBEUI environment.
The IB-23 supports
master-browsing
in Windows
Network Neighborhood
.
Once the IB-23 is physically installed in the
printer and connected to the network, the IB-23 will create a Windows workgroup called
KM-NetPrinters
in Network
Neighborhood, or it will join in this workgroup if it already exists.
Note:
In order to utilize NetBEUI printing, your PC must be configured with the NetBEUI protocol and the Client for
Microsoft Networks service under Network Properties. See Setting Up the PC for NetBEUI
below. For Windows XP, you
must install the NetBEUI protocol from the Windows XP installation CD-ROM.
This section also covers the following topics:
Setting Up the PC for NetBEUI
Setting Up NetBEUI Printing
Configuring NetBEUI
Setting Up the PC for NetBEUI
To configure your Windows PC for NetBEUI printing, verify that all of the following Windows protocols and services are
installed on your PC:
Client for Microsoft Networks
service
NetBEUI
protocol
File and printer sharing for Microsoft Networks
service
To verify, proceed as follows:
1. In Windows 98/Me, select
Start
,
Settings
, and
Control Panel
; and double click
Network
.
In Windows NT 4.0, select
Start
,
Settings
,
Control Panel
,
Network
, and
Protocols
.
In Windows 2000, select
Start
,
Settings
,
Network and Dial-up Connections
,
Local Area Connection
,
and
Properties
.
2. If you have added a protocol or service, restart the PC.
Proceed to the following section to configure NetBEUI printing.
1/5 ページWindows Printing: NetBEUI
2006/05/26file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\windows_printi...
To Next Page
Loading...
