4. In the left menu of the COMMAND CENTER, click
NetBEUI/NetBIOS
.
Figure 5. COMMAND CENTER NetBEUI/NetBIOS Settings Page
5. Complete each field. The fields are described below.
Item
Description
NetBEUI Protocol Choose whether NetBEUI protocol is enabled (On) or disabled (Off).
NetBIOS over
TCP/IP
Choose whether NetBIOS over TCP/IP is enabled (On) or disabled (Off).
Browse Master
When this option is selected, the print system changes to browse master,
and a workgroup is created in My Network. When the option is not selected,
the print system is added to an existing workgroup.
Printer Name
The printer and host names on the TCP/IP General tab (Protocols > TCP/IP >
General) are interrelated. If you want to change the NetBEUI printer name, change
the TCP/IP host name as well.
Workgroup The printing workgroup is a workgroup shown in Entire Network in My Network. The
default workgroup name is "KM-NetPrinters."
Comment You can enter a comment as desired. This field can also be left blank.
4/5 ページWindows Printing: NetBEUI
2006/05/26file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\windows_printi...
To Next Page
Loading...
