certificate for use with the encryption can also be created using the built-in IB-23 web pages. This can be used in
applications where there is a limit on the printer usage, because the certificate can be given an expiration date. The
certificate is a print server certificate, and does not place any restrictions on clients.
Use the following procedure to turn encrypted authentication on or off and to create a certificate.
1. Enter the IP address of the printer into a web browser to display the printer web page.
2. Click the
Advanced
tab.
3. Click
Encryption
in the menu on the left side of the Command Center, then click
General
.
4. Click
On
in the
Authentication
field, and select the encryption scheme to use in the
Privacy Mode
field.
5. Click
Submit
.
Figure 3. The encryption settings page
6. Click
Certificate
.
7. Enter the location and name of the printer into the certificate data fields that are displayed. The
E-mail Address
field may be left blank.
8. Specify the expiration date of the SSL certificate using the
Expiration Date
field. Once the specified expiration
date has passed, the IB-23 cannot be used until a new expiration date is specified.
9. Click
Submit
to save the new settings. The security warnings that appear when connecting to the printer are no
longer displayed once the certificate has been configured.
4/7 ページSecurity
2006/05/26file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\security.htm
To Next Page
Loading...
